The Milo storage bed is a smart solution for reducing the clutter in your bedroom. With a large drawer each side and a pair of large drawers in the foot end there is a total storage capacity of 13 cubic ft (in the 150 size). There is no drawer at the head end making it the perfect solution where there are fitted bedsides or for freestanding bedside solutions. Click here to see our matching bedside cabinets
Click for larger versions
Finish: Bed surround and headboard: oak veneered board
Internal panels, drawer carcasses and lower drawer fronts: oak melamine faced chipboard.
Sprung slat system: birch laminated slats- suitable for all types of mattress.
Overall bed dimensions (drawers closed). Dimensions in cm (inches)
| Nominal bed size |
Width |
Length |
| 135 (4’6”) |
135 - 143 (56”) |
197 (77.5”) |
| 150 (5’0”) |
150 - 158 (62”) |
207 (81.5”) |
Foot end height
48 (18.5”)
headboard height
110 (43”)
Height of slats from floor
41 (16”)
Maximum drawer capacity 20kg (44 lbs)
Total drawer capacity of 135 bed = 0.34 cubic metres (12 cubic ft)
Total drawer capacity of 150 bed = 0.36 cubic metres (13 cubic ft)
Is my bedroom large enough for the Milo storage bed?
We recommend a clear space of:
135 - 254w x 252L (104” x 100”)
150 - 268 w x 262L (105,5” x 103”)
This will allow room space for the drawers to be fully opened.
What is the minimum room space required for installation?
135 - 214 wide x 262 long (84” w x 103”L)
150 - 200 wide x 252 long (79” w x 100”L)
Please note however if the bed is installed in the minimum size room it will not be possible to fully open the side drawers.
What about constricted access due to narrow staircases, doors, loft conversions etc?
The Milo bed is delivered in small component form and only fully assembled in the bedroom. Constricted areas are usually no problem. Please contact us if you have any queries or special requirements.
